; docformat = 'rst' ; ; NAME: ; FSC_Arrow ; ; PURPOSE: ; Provides a device-independent and color-model-independent way of drawing an arrow ; in a specified color. ; ;******************************************************************************************; ; ; ; Copyright (c) 2010, by Fanning Software Consulting, Inc. All rights reserved. ; ; ; ; Redistribution and use in source and binary forms, with or without ; ; modification, are permitted provided that the following conditions are met: ; ; ; ; * Redistributions of source code must retain the above copyright ; ; notice, this list of conditions and the following disclaimer. ; ; * Redistributions in binary form must reproduce the above copyright ; ; notice, this list of conditions and the following disclaimer in the ; ; documentation and/or other materials provided with the distribution. ; ; * Neither the name of Fanning Software Consulting, Inc. nor the names of its ; ; contributors may be used to endorse or promote products derived from this ; ; software without specific prior written permission. ; ; ; ; THIS SOFTWARE IS PROVIDED BY FANNING SOFTWARE CONSULTING, INC. ''AS IS'' AND ANY ; ; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ; ; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT ; ; SHALL FANNING SOFTWARE CONSULTING, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, ; ; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED ; ; TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ; ; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ; ; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ; ; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ; ; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ; ;******************************************************************************************; ; ;+ ; :Description: ; Provides a device-independent and color-model-independent way of drawing an arrow ; in a specified color. ; ; :Categories: ; Graphics ; ; :Params: ; x0: in, required, type=integer/float ; The x location of the blunt end of the arrow. May be a vector. Assumes ; device coordinates. ; x1: in, required, type=integer/float ; The x location of the sharp end of the arrow. May be a vector. Assumes ; device coordinates. ; y0: in, required, type=integer/float ; The y location of the blunt end of the arrow. May be a vector. Assumes ; device coordinates. ; y1: in, required, type=integer/float ; The y location of the sharp end of the arrow. May be a vector. Assumes ; device coordinates. ; ; :Keywords: ; color: in, optional, type=string/integer/long, default='white' ; An alternative way to specify the color to use in erasing the graphics window. ; Color names are those used with FSC_Color. This parameter is used in ; preference to the background_color parameter. ; data: in, optional, type=boolean, default=0 ; Set this keyword of the arrow locations are in data coordinates. ; Device coordinates are assumed. ; hsize: in, optional, type=float ; The size of the the arrow head. By default 1/64th the width ; of the device. (!D.X_SIZE / 64.) ; hthick: in, optional, type=float, default=1.0 ; The thickness of the line drawing the arrowhead. ; linestyle: in, optional, type=integer, default=0 ; The line style of the arrow. Line style integers as in PLOT. ; normal: in, optional, type=boolean, default=0 ; Set this keyword of the arrow locations are in normalized coordinates. ; Device coordinates are assumed. ; solid: in, optional, type=boolean, default=0 ; Set this keyword to draw solid, filled arrows. ; thick: in, optional, type=float, default=1.0 ; The thickness of the line drawing the shaft of the arrow. ; window: in, optional, type=boolean, default=0 ; Set this keyword to add the command to an FSC_Window application. ; ; :Examples: ; Used to draw arrows:: ; IDL> FSC_Arrow, 50, 50, 100, 100, /Solid ; ; :Author: ; FANNING SOFTWARE CONSULTING:: ; David W. Fanning ; 1645 Sheely Drive ; Fort Collins, CO 80526 USA ; Phone: 970-221-0438 ; E-mail: david@idlcoyote.com ; Coyote's Guide to IDL Programming: http://www.idlcoyote.com ; ; :History: ; Change History:: ; Written, 23 November 2010. DWF. Based on old Arrow routine in IDL. ; Added Window keyword 24 January 2011. DWF. ; ; :Copyright: ; Copyright (c) 2010, Fanning Software Consulting, Inc. ;- PRO FSC_Arrow, x0, y0, x1, y1, $ COLOR = scolor, $ DATA = data, $ HSIZE = hsize, $ HTHICK = hthick, $ LINESTYLE=linestyle, $ NORMAL = normal, $ SOLID = solid, $ THICK = thick, $ WINDOW=window, $ _EXTRA=extra Compile_Opt idl2 ; Error handling. Catch, theError IF theError NE 0 THEN BEGIN Catch, /CANCEL void = Error_Message() RETURN ENDIF ; Should this be added to a resizeable graphics window? IF Keyword_Set(window) AND ((!D.Flags AND 256) NE 0) THEN BEGIN void = FSC_QueryWin(COUNT=wincnt) IF wincnt EQ 0 THEN FSC_Window FSC_Window, 'FSC_Arrow', x0, y0, x1, y1, $ COLOR = scolor, $ DATA = data, $ HSIZE = hsize, $ HTHICK = hthick, $ LINESTYLE=linestyle, $ NORMAL = normal, $ SOLID = solid, $ THICK = thick, $ _REF_EXTRA=extra RETURN ENDIF ; Get the current color table vectors. TVLCT, rr, gg, bb, /Get ; Set up keyword parameters. IF N_Elements(thick) EQ 0 THEN thick = 1. IF N_Elements(hthick) EQ 0 THEN hthick = thick ; Choose a color. IF N_Elements(sColor) EQ 0 THEN BEGIN IF !D.Name EQ 'PS' THEN BEGIN sColor = 'OPPOSITE' ENDIF ELSE BEGIN IF (!D.Window GE 0) AND ((!D.Flags AND 256) NE 0) THEN BEGIN pixel = TVRead(!D.X_Size-1, !D.Y_Size-1, 1, 1) IF (Total(pixel) EQ 765) THEN sColor = 'BLACK' IF (Total(pixel) EQ 0) THEN sColor = 'WHITE' IF N_Elements(sColor) EQ 0 THEN sColor = 'OPPOSITE' ENDIF ELSE sColor = 'OPPOSITE' ENDELSE ENDIF IF N_Elements(sColor) EQ 0 THEN color = !P.Color ELSE color = sColor IF Size(color, /TYPE) EQ 3 THEN IF GetDecomposedState() EQ 0 THEN color = Byte(color) IF Size(color, /TYPE) LE 2 THEN color = StrTrim(Fix(color),2) ; Head size in device units IF N_Elements(hsize) EQ 0 $ THEN arrowsize = !D.X_Size/50. * (hthick/2. > 1) $ ELSE arrowsize = Float(hsize) ; If arrowsize GT 15, THEN use 20% arrow. Otherwise use 30%. IF arrowsize LT 15 THEN BEGIN mcost = -0.866D sint = 0.500D msint = -sint ENDIF ELSE BEGIN mcost = - 0.939693D sint = 0.342020D msint = -sint ENDELSE ; Process each arrow in the vector. FOR i = 0L, N_Elements(x0)-1 DO BEGIN CASE 1 OF Keyword_Set(data): p = Convert_Coord([x0[i],x1[i]],[y0[i],y1[i]], /DATA, /TO_DEVICE) Keyword_Set(normal): p = Convert_Coord([x0[i],x1[i]],[y0[i],y1[i]], /NORMAL, /TO_DEVICE) ELSE: p = [[x0[i], y0[i]],[x1[i], y1[i]]] ENDCASE xp0 = p[0,0] xp1 = p[0,1] yp0 = p[1,0] yp1 = p[1,1] dx = xp1 - xp0 dy = yp1 - yp0 ; The length. zz = SQRT(dx^2d + dy^2d) IF zz GT 0 THEN BEGIN dx = dx/zz ; Cos th dy = dy/zz ; Sin th ENDIF ELSE BEGIN dx = 1. dy = 0. zz = 1. ENDELSE IF arrowsize gt 0 $ THEN a = arrowsize $ ;a = length of head ELSE a = -zz * arrowsize xxp0 = xp1 + a * (dx*mcost - dy * msint) yyp0 = yp1 + a * (dx*msint + dy * mcost) xxp1 = xp1 + a * (dx*mcost - dy * sint) yyp1 = yp1 + a * (dx*sint + dy * mcost) SetDecomposedState, 1, CURRENT=currentState IF Keyword_Set(solid) THEN BEGIN ;Use polyfill? b = a * mcost*.9d ; End of arrow shaft (Fudge to force join) FSC_PlotS, [xp0, xp1+b*dx], [yp0, yp1+b*dy], /DEVICE, $ COLOR=color, THICK=thick, LINESTYLE=linestyle, _Extra=extra FSC_ColorFill, [xxp0, xxp1, xp1, xxp0], [yyp0, yyp1, yp1, yyp0], $ /DEVICE, COLOR = color ENDIF ELSE BEGIN FSC_PlotS, [xp0, xp1], [yp0, yp1], /DEVICE, COLOR=color, THICK=thick, $ LINESTYLE=linestyle, _Extra=extra FSC_PlotS, [xxp0,xp1,xxp1],[yyp0,yp1,yyp1], /DEVICE, COLOR=color, $ THICK=hthick, LINESTYLE=linestyle, _Extra=extra ENDELSE SetDecomposedState, currentState ENDFOR ; Restore the input colors. IF !D.NAME NE 'Z' THEN TVLCT, rr, gg, bb END